how to apply a DTF print (thermal transfer) on clothing yourself

To apply a DTF (thermal transfer) print on clothing yourself, you will need several necessary materials and tools. Here are the basic steps you need to take:

Preparation of the project: Design the graphic or pattern you want to put on the clothing. You can use a graphics program to create a design.

Printing on special DTF FILM : Print a pattern on special DTF film using a digital printer that supports this type of film. Make sure you use inks suitable for DTF printing.

Preparation of clothing: Select the appropriate clothing on which you want to place DTF printing. Make sure clothing is clean and wrinkle-free. If necessary, iron the garment to obtain a smooth surface.

Cutting out a pattern: Cutting out a pattern from DTF foil according to its contour. You can use scissors or a cutting plotter if you have such equipment.

Preparing your thermal transfer machine: Prepare your thermal transfer machine, such as a heat press. Set the appropriate temperature and time based on the manufacturer's recommendations.

Placing the pattern on clothing: After warming up the machine, transfer the cut pattern from the DTF foil to the clothing, placing it in the selected place. Make sure the pattern is positioned correctly and there are no wrinkles.

Heating the print: Close the machine and apply appropriate pressure. Maintain the set temperature and time to transfer the pattern from the DTF foil to the garment. Follow the recommendations of the thermal transfer machine manufacturer.

Removing the DTF foil: After completing the welding process, carefully remove the DTF foil from the clothing, leaving the print on the material.

Remember that before you start DTF printing on your own, I recommend reading and understanding the operating instructions for the printer, DTF foil and thermal transfer machine. Test on sample materials to adjust temperature, time and pressure settings for optimal results.